1/2 inch Diameter Round U-Bolt is Custom Bent from the choices you make here. Please read the directions carefully.
1/2 inch Diameter Round U-Bolt
- Pricing includes Extra Deep Nuts and Hardened Thick U-bolt Washers
- Custom bent U-bolts are non-returnable.
Measure your U-bolt using the image above to to get your pricing.
- “C” = Inside Width (measure inside width)
- “L” = Inside Length (measure from the highest point inside to the bottom of the leg of U-bolt)
- Note that the “L” measurement (length) may be slightly longer and is not exact depending on total rod length. The reason the “L” measurement may be longer (up to 3/4 of an inch) is we add “C” and “L x 2” measurements to get the total material length which is made in even lengths, 22, 28, 38 etc. We do not want your U-bolt to be shorter than the length you ordered.
- “T” = Approximate Thread Length is calculated by multiplying 2 X “L” plus “C” (which equals the overall length of rod material before bending)
- Approximate thread lengths are predetermined and are listed below;
- (Total rod length = Thread length on each leg)
- 8″ to 20″ = 2″-3″
- 22″ to 30″ = 4″
- 32″ to 48″ = 6″
- (Total rod length = Thread length on each leg)
- Approximate thread lengths are predetermined and are listed below;
These 1/2 inch Diameter Round U-Bolts are for suspension, leaf spring and body mounting primarily, but have hundreds of other uses. We bend our own U-bolts on a hydraulic bender cold so the grain of the metal stays oriented in the right direction for maximum strength.
The only thread pitch we use are SAE (fine) and are manufactured by rolling a rod between dies creating threads for maximum strength. This makes the non-threaded part of the stock slightly smaller in diameter than the diameter of the threads and are not thread-able beyond the way they are.
Small diameter U-bolts (especially 1/2 diameter and smaller) are more susceptible to measuring slightly wider due to the spring-like nature of the steel, but U-bolts, when properly torqued will typically conform to the shape of the item it is fitting over.
This product is not for ornamental use and is designed to be torqued.
Scott Page (verified owner) –
exactly what i ordered to specs good quality materials as well
Scott Page –
Sarah Carpenter-Vascik (verified owner) –
After much searching, I found exactly what I was looking for at a reasonable price and prompt delivery. Thank You!
Sarah Carpenter-Vascik –
Baundi (verified owner) –
They helped me out with the u-bolts I needed, They were the only place I could find that had the right size and at a good price.
Baundi –
Lynn Alessi (verified owner) –
Excellent quality, prompt service, as described. I do wish your tolerance on length was a little tighter.
Lynn Alessi –
Bigjohn621 (verified owner) –
Exactly what I ordered. fast shipping, excellent service
Bigjohn621 –
Tim –
Custom sized to my specs. Great value.
Tim –
Neal Latkowski (verified owner) –
Perfect fit , no issues
Neal Latkowski –
Alfred and Cherie (verified owner) –
Just what I wanted!! And site makes it easy to get measurements correct, very satisfied and would highly recommend disband to all!! Great Guy and service!!! Thank You DSUBAN Spings Aloha,
Alfred and Cherie –
Stacy Thomas (verified owner) –
Exactly what I needed. Fit was perfect and price was great, fast shipping too.
Stacy Thomas –
Hector Zamora –
I had difficulty finding u-bolts for my vintage trailer so had to go custom size. Dsuban came through with a precise set of u-bolts that fit perfectly. Precision, quality, prompt delivery – Dsuban came through for me. I would buy from this U.S. company again. Thanks Dsuban.
Hector Zamora –