,

10082221 ConMet PreSet Drive Hub Assembly – Hub Pilot-10 Stud-ABS

Availability:

1 in stock


Aftermarket PreSet hubs, with pre-adjusted bearings, are shipped assembled and ready for installation. Look at specifications tab for details.

Aluminum Drive Hub for aluminum wheel application, 1.31 offset.

  • ALUMINUM PRESET R DRIVE
  • 23K GAWR
  • 11500 lb Hub Load Rating
  • Casting Number 10030844

Need help? Use the ConMet Hub Cross Reference and Part Identifier.

$501.79 Each

1 in stock

Estimate Shipping

Compare

10082221 ConMet PreSet Drive Hub Assembly – Hub Pilot-10 Stud-ABS

10082221 ConMet PreSet Drive Hub Assembly – Hub Pilot-10 Stud-ABS

The most advanced wheel ends on the market, featuring ConMet wheel seals and bearings.

By replacing your wheel ends with genuine PreSet hubs, you get the following benefits:

  • Minimize downtime
  • Bring down labor costs
  • Diminish potential for errors during reassembly and installation
  • Reduce liability Complete warranty on all components

Ever since ConMet’s PreSet hub assembly was introduced in 1995, truck OEM’s have experienced the ease of its installation process. There’s no need for assembly or bearing adjustment, the PreSet assembly just slides right onto the spindle.

Why shouldn’t technicians in the aftermarket experience the same benefits?

Rebuilding or servicing hubs comes with risks. Servicing a hub oftentimes requires rebuilding the hub by replacing bearing cups and cones, the wheel seal, and manually-adjusting the bearings. Improperly servicing a hub can create a variety of wheel end problems, which could include a wheel off situation, leading to the possibility of serious injury and up to hundreds of thousands of dollars in fines or damages.

Given the risks of rebuilding hubs, what are the benefits of replacing them with ConMet’s PreSet Aftermarket hubs?

  • Besides keeping the truck OEM genuine like it came from the factory, PreSet replacement hubs come with a three-year limited warranty (go to the ConMet website for details).
  • PreSet hubs are available when you need them since they are stocked in distribution centers.
  • A technician can rebuild a hub in about three hours. On the other hand, that same technician can replace a hub in as little as one hour. This can free up service bays for other service opportunities.
  • Most importantly, replacing hubs gives you peace of mind knowing you did your best to provide protection against potential liability issues.
ConMet Cross References / Brochures

5 years/500,000 mile ConMet manufacturer’s warranty (go to the ConMet website for details) when installed with PreSet Plus Spindle Nut: 10036551 (PreSet Hubs Only)

SKU: CO-10082221 Categories: , Tags: ,
Weight 55 lbs
ALUMINUM PRESET R DRIVE
10082221

PRODUCT SPECS

MATERIAL ALUMINUM
AXLE POSITION DRIVE
AXLE R
ASSEMBLY TYPE PRESET
BEARING SET (INBOARD) SET :429 CUP :592A PS (PRESET)
BEARING SET (OUTBOARD) SET :430 CUP :572 PS (PRESET)
COMPATIBLE BRAKE TYPE DRUM
HUB MOUNTING SYSTEM HP10
WHEEL STUD STANDOUT (IN.) 3.81
WHEEL MATERIAL ALUMINUM WHEELS
AXLE STUD THREAD 3/4”-10 UNC – R.H.
FLANGE OFFSET (IN.) 1.31
BARREL LENGTH SHORT BARREL: 6.9″
WEIGHT (LBS.) 50.7
CONVENTIONAL HUB OPTION 10083799
PRESET / PRESET PLUS HUB REBUILD KIT 10081729
INNER BEARING 10041915
OUTER BEARING 10041916
SEAL & SPACER 10081520

Wheel Stud Number 10001331

ConMet Same As Numbers;

10001474
10001481
10001494
10001497
10001512
10001515
10003746
10003747
10003749
10003754
10003755
10003758
10004003
10004006
10012121
10012122
10020300
10020302
10030917
10030918
10031264
10036774
10045170

Con Met Hub 10082221

  • Material: Aluminum
  • Axle Position: Drive
  • Axle Spindle: R
  • Assembly Type PreSet
  • Compatible Brake Type Drum
  • Hub Mounting System HP10
  • Wheel Stud Standout (Inches) 3.81
  • Wheel Material Aluminum
  • Barrel Length Short
  • Mounting: Hub Piloted – 10 Studs
  • ABS: Yes, Has Stamped ABS Ring
  • Wheel Stud Bolt Circle Diameter: 285.75 mm
  • Wheel Stud: 10001331
  • Hub Rating: 11,500 LBS 5,216 kg
  • Drum Pilot Diameter: 8.78″
  • Bearing Set: ½-stand
  • Fill Hole: 9/16”-18 UNF — #6 SAE J1926
  • ABS Offset: 2.33″
  • Hub Offset: 1.31″
  • Axle Stud Standout: 1.75″
  • Axle Stud Diameter: 3/4”
  • Machining 10001419
  • Machined Flange Thickness: 1.34″
  • Casting: 10009779
  • Casting Material: A356.0-T61 Aluminum
  • Seal Vendor: SKF
  • Volvo part 85150212
  • Replaces Con Met 10004003, 10001494
  • Replaces Volvo 20478407, 20478408, 20499459, 85143669

Brand

ConMet

Dsuban Spring is a proud distributor of ConMet products. When it comes to wheel end performance, ConMet is the best value for cost per mile and the safest product choices for customers in the commercial vehicle industry. For help in determining your part number, this link to the ConMet App will help.
ConMet

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “10082221 ConMet PreSet Drive Hub Assembly – Hub Pilot-10 Stud-ABS”

There are no reviews yet.

Free UPS Ground Shipping on orders of $99 or more!

X
0