201-EBT-01RK Right Weigh Exterior Digital Load Scale Kit-1 HCV

201-EBT-01RK Right Weigh Exterior Digital Load Scale Kit-1 HCV

201-EBT-01RK Right Weigh Exterior Digital Load Scale Kit-1 HCV

Description:

Right Weigh’s 201-EBT-01RK Bluetooth Exterior Digital load scale kit is designed for any air suspension axle group with one height control valve. After both an empty and loaded calibration has been performed at a certified ground scale, the gauge will reliably display the on-the-ground axle group weight in pounds or kilograms. When properly calibrated and used, Right Weigh’s on-board load scales are the most valuable tool available for maintaining safe and legal axle weights. The 201-EBT-01 cannot be used on an axle group that has two HCVs. To monitor an axle group that has two HCVs you will need the 201-EBT-02.

201-EBT-01RK Specs:

• Includes (1) 201-SK Installation Kit
• Contains all parts that should be needed to monitor weight, depending upon height control valve configuration.
• Max Height Control Valves: 1
• Max Axle Groups Monitored: 1
• Max Axles per Axle Group: 3
• Color: Black
• Mounting: Exterior
• Enclosure Included: Yes (replacement)
• Mounting Type: Bolt-On
• Bluetooth: Yes
• MFG Warranty: 3 Years
• Installation-Operation-Calibration Manual:
  • pp-003-0010-rev-n-201-ebt-01b
    • Firmware Versions 31.001, 31.002, 31.003, 31.004, 31.005, 31.006, 31.007, 32.001, 32.002, 32.003, 34.001, 34.002, 34.003, 34.004, 34.005, 35.001, 40.001, 40.002, 40.003, 42.001, 42.002, 42.003, 42.004, 42.005, 42.006, 42.007, 42.008, 42.009

Technical Specifications

• Operating Temperature: -22° F to +185° F (-30° C to +85° C)
• Storage Temperature: -40° F to +185° F (-40° C to +85° C)
• Power Requirement: 9 VDC to 32 VDC (Switched)
• Units: Pounds (LBS) or Kilograms (KG)
• Housing: High impact polycarbonate blend
• Display: 0.8” LCD sunlight readable

General Information about Right Weigh Interior Digital Load Scales

The 201-EBT-01RK scale is designed to be mounted on the outside of a truck or trailer and mounted the included protective enclosure. The 201-EBT-01 load scale must be calibrated both empty and loaded to work properly. The scale associates the air pressure in the suspension system to the weight you enter at the time of calibration. You will need to
calibrate once while the vehicle is empty, and again while the vehicle is loaded for each axle group being monitored.

Help and additional information can be found on the Right Weigh Load Scales Website.