*FREE UPS Ground
on orders of $99 or more!
Custom Made in USA!
5/8 inch Diameter Round U-Bolt
5/8 inch (18 threads per inch, SAE) Diameter Round U-Bolt with Deep Nuts and Washers only. No tie plate is included, but is available. Oil finish only, no plating/coatings available. Grade 8.
Price shown is for each U-Bolt including Deep Nuts & Washers. You must order in multiples of 2.
$14.06 – $38.45 Each U-Bolt
5/8 inch Diameter Round U-Bolt is Custom Bent from the choices you make here. Please read the directions carefully.
5/8 inch Diameter Round U-Bolt
- Pricing includes Extra Deep Nuts and Hardened Thick U-bolt Washers
- Custom bent U-bolts are non-returnable.
Measure your U-bolt using the image above to to get your pricing.
- “C” = Inside Width (measure inside width)
- “L” = Inside Length (measure from the highest point inside to the bottom of the leg of U-bolt)
- Note that the “L” measurement (length) may be slightly longer and is not exact depending on total rod length. The reason the “L” measurement may be longer (up to 3/4 of an inch) is we add “C” and “L x 2” measurements to get the total material length which is made in even lengths, 22, 28, 38 etc. We do not want your U-bolt to be shorter than the length you ordered.
- “T” = Approximate Thread Length is calculated by multiplying 2 X “L” plus “C” (which equals the overall length of rod material before bending)
- Approximate thread lengths are predetermined and are listed below;
- (Total rod length = Thread length on each leg)
- 8″ to 20″ = 2″-3″
- 22″ to 30″ = 4″
- 32″ to 48″ = 6″
- (Total rod length = Thread length on each leg)
- Approximate thread lengths are predetermined and are listed below;
These 5/8 inch Diameter Round U-Bolts are for suspension, leaf spring and body mounting primarily, but have hundreds of other uses. We bend our own U-bolts on a hydraulic bender cold so the grain of the metal stays oriented in the right direction for maximum strength.
The only thread pitch we use are SAE (fine) and are manufactured by rolling a rod between dies creating threads for maximum strength. This makes the non-threaded part of the stock slightly smaller in diameter than the diameter of the threads and are not thread-able beyond the way they are.
Small diameter U-bolts (especially 1/2 diameter and smaller) are more susceptible to measuring slightly wider due to the spring-like nature of the steel, but U-bolts, when properly torqued will typically conform to the shape of the item it is fitting over.
This product is not for ornamental use and is designed to be torqued.
Brand
Dsuban Spring Service Inc.
Victoria (verified owner) –
Good product for a good price. We were making in house, and now we’re saving money by buying from Dsuban!
Victoria –
dave keffeler –
got me outta a bind and acted like they do magic all the time
dave keffeler –
Heriberto Sanchez (verified owner) –
Good quality
Heriberto Sanchez –
Brock Buckingham (verified owner) –
Great u bolts, they were the perfect size. Only thing that could be better is if they had an anti rust coating.
Brock Buckingham –
Rich –
Thank you for the review!
Rich –
denny pratt (verified owner) –
Very happy with bolts and service
denny pratt –
Brian Tripodina (verified owner) –
U bolts were perfect! Shipped fast and installed perfectly!
Brian Tripodina –
Mike Smith (verified owner) –
The u bolts are high quality and got here quickly.
Mike Smith –
Jason Lemke (verified owner) –
Fast service quality product
Jason Lemke –
STEPHANIE –
The U bolts were exactly what I needed and fit perfectly! I will definitely use your company again if I need something. Thank you
STEPHANIE –
Nicolas Lucena –
Very easy to order online
Product is excellent!
Nicolas Lucena –
Chris Hays (verified owner) –
U bolts were exactly as ordered and shipped quickly
Chris Hays –