Shop
Showing 1441–1464 of 2122 resultsSorted by price: low to high
-
Wheel End, Hubs
10082231 ConMet PreSet Trailer Hub Assembly – HP-10 Stud-ABS
*FREE UPS Ground
on orders of $99 or more!Wheel End, Hubs10082231 ConMet PreSet Trailer Hub Assembly – HP-10 Stud-ABS
Aftermarket PreSet hubs, with pre-adjusted bearings, are shipped assembled and ready for installation. Look at specifications tab for details.
Cast Iron Hub TP Parallel Spindle for aluminum wheel application, 1.35 offset.
- IRONPRESET TP TRAILER
- 25K GAWR
- 12500 lb Hub Load Rating
- Hub Casting Number 10083939
- This part becomes PreSet Plus Hub 10086808 when paired with the 10036553 nut kit.
Need help? Use the ConMet Hub Cross Reference and Part Identifier.
SKU: CO-10082231 -
Air Controls, Heavy Truck, Lift Axle, Self Steering
B2400-B04 AIRman Air Control Kit for Steerable Lift Axle Applications (HAC-SSI)
Sale!
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Air Controls, Heavy Truck, Lift Axle, Self SteeringB2400-B04 AIRman Air Control Kit for Steerable Lift Axle Applications (HAC-SSI)
Original AIRman, not imported!
Used in Steerable lift axle applications.
This air control kit is made by AIRman which directly replaces HAC-SSI formally from Hendrickson. The face of the panel does not bear the Hendrickson name but other than that, is identical to the original HAC-SSI. This panel also replaces flip switch model R-017513-00.
The Hendrickson version of the HAC-SSI is discontinued and is replaced by LC-SSI, which requires new plumbing and the panel size is different. We stock it also, and you can find it HERE.
- Note: A electrical relay may be required to connect to the reverse light circuit for the “lift in reverse” feature. Download the installation instructions below for more details.
- 12vdc applied to the lift solenoid raises the axle. This would be typically connected to the reverse light circuit.
- Note that some vehicles use a negative switched reverse light circuit and would require the use of a relay to operate properly (not included).
- 12vdc applied to the lift solenoid raises the axle. This would be typically connected to the reverse light circuit.
- This kit is for lifting/lowering the suspension only and does not control brakes.
Quantity discounts when ordering in bulk, mix-match with B2400-B03!
SKU: AP-B2400-B04 - Note: A electrical relay may be required to connect to the reverse light circuit for the “lift in reverse” feature. Download the installation instructions below for more details.
-
Wheel End, Hubs
10082250 ConMet Trailer Hub Assembly – HP-10 Stud-ABS
*FREE UPS Ground
on orders of $99 or more!Wheel End, Hubs10082250 ConMet Trailer Hub Assembly – HP-10 Stud-ABS
This hub is a ConMet Conventional Trailer Hub Assembly that is a Non-PreSet, manual adjust design. Does not include bearings or seals. Look at specifications tab for details.
Iron Hub TN Tapered Spindle for aluminum wheel application, .34 Offset.
- IRON CONVENTIONAL TN TRAILER
- 23K GAWR
- 11500 lb Hub Load Rating
Need help? Use the ConMet Hub Cross Reference and Part Identifier.
SKU: CO-10082250 -
Heavy Truck, Air Supply, Gauges, Load Scales, Load Scales
310-54-M3 Right Weigh Load Scale – 2 HCV
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Heavy Truck, Air Supply, Gauges, Load Scales, Load Scales310-54-M3 Right Weigh Load Scale – 2 HCV
The 310-54-M3 is designed for exterior installation with a tandem axle air suspension that is controlled by TWO height control valves.
- 310-54-M3 is built in a Black Polypropylene Box
- Tandem axle application up to 54,000 Lbs.
- 3-1/2in Dial Face.
- Contains mounting bracket & bolts.
- Kit does not include air hoses/fittings.
(If needed, uses (2) 101-SK kit ordered separately)
SKU: RL-310-54-M3 -
Heavy Truck, Air Supply, Air Cylinders
TRB3.50X8.58 AIRman 3.5in Air Cylinder 8.58in Stroke
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Heavy Truck, Air Supply, Air CylindersTRB3.50X8.58 AIRman 3.5in Air Cylinder 8.58in Stroke
TRB3.50X8.58 AIRman 3.5in Air Cylinder 8.58in Stroke
See Drawing Below.
Specs:
- 3.50″ Bore X 8.58” Stroke Cylinder
- 1/2 inch Clevis Pin and Cotter Pin for Cylinder End Included
- Clevis for the rod is NOT included.
- 5/8” – 18 UNF threads on rod.
Short lead time. If this is a rush order, please call us.
SKU: AP-TRB3.5X8.58
