Best Sellers
Our Best Sellers
This is some of our best selling items.
-
Hubs, Wheel End
10082217 ConMet PreSet Drive Hub Assembly – Hub Pilot-10 Stud-ABS
*FREE UPS Ground
on orders of $99 or more!Hubs, Wheel End10082217 ConMet PreSet Drive Hub Assembly – Hub Pilot-10 Stud-ABS
Aftermarket PreSet hubs, with pre-adjusted bearings, are shipped assembled and ready for installation. Look at specifications tab for details.
Aluminum Drive Hub for aluminum wheel application, 1.31 offset.
- ALUMINUM PRESET R DRIVE
- 23K GAWR
- 11500 lb Hub Load Rating
- Casting Number 10001280
Need help? Use the ConMet Hub Cross Reference and Part Identifier.
SKU: CO-10082217 -
Heavy Truck, Lift Axle, Repair Parts, Shock Absorbers, Steering Stabilizer Shocks
R-009600 Hendrickson Lift Axle Stabilizer Shock
*FREE UPS Ground
on orders of $99 or more!Heavy Truck, Lift Axle, Repair Parts, Shock Absorbers, Steering Stabilizer ShocksR-009600 Hendrickson Lift Axle Stabilizer Shock
This shock a OEM Hendrickson part. It fits some Composilite SC applications (SCT10/13) and others.
- Hendrickson right to substitute notice 3/29/2021 (alternative suppliers, same part number)
- Some shocks may have 009600-2 stamped on side.
Sold each with a minimum qty of 2.
SKU: HL-R-009600 -
Heavy Truck, Lift Axle, Repair Parts, Shock Absorbers, Steering Stabilizer Shocks
632155 Lift Axle Coilover Return Stabilizer Shock (646177)
*FREE UPS Ground
on orders of $99 or more!Heavy Truck, Lift Axle, Repair Parts, Shock Absorbers, Steering Stabilizer Shocks632155 Lift Axle Coilover Return Stabilizer Shock (646177)
OE #632155 (Gabriel 646177) Pre-Banded Coilover return stabilizer shock for most lift axle steering applications.
Sold each with a minimum qty of 2.
SKU: 632155 -
Heavy Truck, Seals, Wheel End
RM-T03 RevMax Trailer TN Seal by RevHD
On Sale!
Get 5% off in packs of 12!
*FREE UPS Ground
on orders of $99 or more!Heavy Truck, Seals, Wheel EndRM-T03 RevMax Trailer TN Seal by RevHD
RM-T03 RevMax Trailer TN Seal by RevHD
Severe duty wheel seals for trailer axles with TN spindles.
Equivalent to:
- National Gold 38000 series
- Stemco Discover
- SKF Extreme
Cross Reference;
- Stemco
- 373-0143
- 373-0243
- 372-7097
- 307-0743
- National
- 370025A
- 380025A
- SKF-CR
- 46305
- 46304
- 46300
- 46308
- ConMet
- 10045888
SKU: RV-RM-T03 -
Air Controls, Heavy Truck, Lift Axle, Self Steering
B2400-B04 AIRman Air Control Kit for Steerable Lift Axle Applications (HAC-SSI)
On Sale!
*FREE UPS Ground
on orders of $99 or more!USA!
Air Controls, Heavy Truck, Lift Axle, Self SteeringB2400-B04 AIRman Air Control Kit for Steerable Lift Axle Applications (HAC-SSI)
Used in Steerable lift axle applications.
This air control kit is made by AIRman which directly replaces HAC-SSI formally from Hendrickson. The face of the panel does not bear the Hendrickson name but other than that, is identical to the original HAC-SSI. This panel also replaces flip switch model R-017513-00.
The Hendrickson version of the HAC-SSI is discontinued and is replaced by LC-SSI, which requires new plumbing and the panel size is different. We stock it also, and you can find it HERE.
- Note: A electrical relay may be required to connect to the reverse light circuit for the “lift in reverse” feature. Download the installation instructions below for more details.
- 12vdc applied to the lift solenoid raises the axle. This would be typically connected to the reverse light circuit.
- Note that some vehicles use a negative switched reverse light circuit and would require the use of a relay to operate properly (not included).
- 12vdc applied to the lift solenoid raises the axle. This would be typically connected to the reverse light circuit.
- This kit is for lifting/lowering the suspension only and does not control brakes.
Quantity discounts when ordering in bulk, mix-match with B2400-B03!
SKU: AP-B2400-B04 - Note: A electrical relay may be required to connect to the reverse light circuit for the “lift in reverse” feature. Download the installation instructions below for more details.
-
Air Controls, Heavy Truck, Lift Axle, Non Steering, Self Steering
LC-SSI_R2 Hendrickson Air Control Kit for Steer & Non-Steer Lift Axles
On Sale!
*FREE UPS Ground
on orders of $99 or more!USA!
Air Controls, Heavy Truck, Lift Axle, Non Steering, Self SteeringLC-SSI_R2 Hendrickson Air Control Kit for Steer & Non-Steer Lift Axles
AVAILABLE NOW!
Genuine LC-SSI Hendrickson Air Control Kit replaces existing HAC-SSI and HAC-NSI auxiliary lift axle control kits with a change in air line plumbing. The panel has exactly the same measurements as the HAC series, 2-3/4 x 7-1/4 with a bolt pattern of 2.25 x 6-5/8.
- Lift in reverse application (can be used in a non-steer application by not wiring the solenoid).
- Note: A electrical relay may be required to connect to the reverse light circuit for the “lift in reverse” feature. Download the installation instructions below for more details.
- 12vdc applied to the lift solenoid raises the axle. This would be typically connected to the reverse light circuit. Axle lowers when power is removed.
- Note that some vehicles use a negative switched reverse light circuit and would require the use of a relay to operate properly (not included).
- 12vdc applied to the lift solenoid raises the axle. This would be typically connected to the reverse light circuit. Axle lowers when power is removed.
- Note: A electrical relay may be required to connect to the reverse light circuit for the “lift in reverse” feature. Download the installation instructions below for more details.
- Hendrickson Part Number B-38914-2 (LC-SSI_R2 )
- LC-SSI_R2 Supecedes LC-SSI
- This kit is for lifting/lowering the suspension only and does not control brakes.
SKU: HL-LC-SSI_R2 - Lift in reverse application (can be used in a non-steer application by not wiring the solenoid).
-
Hubs, Wheel End
10082227 ConMet PreSet Trailer Hub Assembly – HP-10 Stud-ABS
*FREE UPS Ground
on orders of $99 or more!Hubs, Wheel End10082227 ConMet PreSet Trailer Hub Assembly – HP-10 Stud-ABS
Aftermarket PreSet hubs, with pre-adjusted bearings, are shipped assembled and ready for installation. Look at specifications tab for details.
Cast Iron Hub TN Tapered Spindle for aluminum wheel application, .28 offset.
- ALUMINUM PRESET TN TRAILER
- 23K GAWR
- 11500 lb Hub Load Rating
- Hub Casting Number 10083937
- This part becomes PreSet Plus Hub 10086805 when paired with the 10036552 nut kit.
Need help? Use the ConMet Hub Cross Reference and Part Identifier.
SKU: CO-10082227 -
Wheel End, Hubs
10082207 ConMet PreSet Steer Hub Assembly – Hub Pilot-10 Stud-ABS
*FREE UPS Ground
on orders of $99 or more!Wheel End, Hubs10082207 ConMet PreSet Steer Hub Assembly – Hub Pilot-10 Stud-ABS
Aftermarket PreSet hubs, with pre-adjusted bearings, are shipped assembled and ready for installation. Look at specifications tab for details.
Aluminum Steer Hub for aluminum wheel application, 5.06 offset.
- ALUMINUM PRESET FF FRONT
- 13.2K GAWR
- 6600 lb Hub Load Rating
- Casting Number 10031185
Need help? Use the ConMet Hub Cross Reference and Part Identifier.
SKU: CO-10082207 -
Heavy Truck, Seals, Wheel End
RM-D02 RevMax Drive Seal by RevHD
On Sale!
Get 5% off in packs of 12!
*FREE UPS Ground
on orders of $99 or more!Heavy Truck, Seals, Wheel EndRM-D02 RevMax Drive Seal by RevHD
RM-D02 RevMax Drive Seal by RevHD
Severe duty wheel seals for Eaton / Meritor drive axles.
Equivalent to:
- National Gold 38000 series
- Stemco Discover
- SKF Extreme
Cross Reference;
- Stemco
- 393-0173
- 393-0273
- 392-9131
- 309-0973
- National
- 370003A
- 380003A
- SKF-CR
- 47697
- 47696
- 47691
- 47694
- 47692
- 47695
- 47693
- ConMet
- 10045887
SKU: RV-RM-D02 -
Air Cylinders, Air Supply, Heavy Truck
B3000-259-H-6.5 AIRman Tail-a-Gater Tailgate Cylinder
On Sale!
*FREE UPS Ground
on orders of $99 or more!USA!
Air Cylinders, Air Supply, Heavy TruckB3000-259-H-6.5 AIRman Tail-a-Gater Tailgate Cylinder
B3000-259-H-6.5 (w/6.5 inch rod) AIRman Tail-a-Gater Tailgate Cylinder is made from heavy duty aluminum thick wall tubing with pivoting trunnion flange for harsh conditions.
Does NOT include clevis and is exactly as pictured (rod extended). Drawing below & in Specs.
OE Numbers:
- East Mfg. 510-25950-03 (cylinder only)
- Velvac 100603
- MAC Trailer 27080091
Specs:
- Model Number: B3000-259-H6.5
- Bore Size: 6.00in
- Cylinder Length: 7-7/8in
- Stroke: 3.00in
- Extended Rod Length: 6.50in (Measuring from flat studded plate to end of rod)
- Rod Size: 5/8in
- Air inlet is on the back plate. Vent is on the pushrod side.
SKU: AP-B3000-259-H-6.5
