Best Sellers
Our Best Sellers
This is some of our best selling items.
-
Hubs, Wheel End
10082227 ConMet PreSet Trailer Hub Assembly – HP-10 Stud-ABS
*FREE UPS Ground
on orders of $99 or more!Hubs, Wheel End10082227 ConMet PreSet Trailer Hub Assembly – HP-10 Stud-ABS
Aftermarket PreSet hubs, with pre-adjusted bearings, are shipped assembled and ready for installation. Look at specifications tab for details.
Cast Iron Hub TN Tapered Spindle for aluminum wheel application, .28 offset.
- ALUMINUM PRESET TN TRAILER
- 23K GAWR
- 11500 lb Hub Load Rating
- Hub Casting Number 10083937
- This part becomes PreSet Plus Hub 10086805 when paired with the 10036552 nut kit.
Need help? Use the ConMet Hub Cross Reference and Part Identifier.
SKU: CO-10082227 -
Air Controls, Heavy Truck, Lift Axle, Self Steering
B2400-B04 AIRman Air Control Kit for Steerable Lift Axle Applications (HAC-SSI)
Sale!
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Air Controls, Heavy Truck, Lift Axle, Self SteeringB2400-B04 AIRman Air Control Kit for Steerable Lift Axle Applications (HAC-SSI)
Original AIRman, not imported!
Used in Steerable lift axle applications.
This air control kit is made by AIRman which directly replaces HAC-SSI formally from Hendrickson. The face of the panel does not bear the Hendrickson name but other than that, is identical to the original HAC-SSI. This panel also replaces flip switch model R-017513-00.
The Hendrickson version of the HAC-SSI is discontinued and is replaced by LC-SSI, which requires new plumbing and the panel size is different. We stock it also, and you can find it HERE.
- Note: A electrical relay may be required to connect to the reverse light circuit for the “lift in reverse” feature. Download the installation instructions below for more details.
- 12vdc applied to the lift solenoid raises the axle. This would be typically connected to the reverse light circuit.
- Note that some vehicles use a negative switched reverse light circuit and would require the use of a relay to operate properly (not included).
- 12vdc applied to the lift solenoid raises the axle. This would be typically connected to the reverse light circuit.
- This kit is for lifting/lowering the suspension only and does not control brakes.
Quantity discounts when ordering in bulk, mix-match with B2400-B03!
SKU: AP-B2400-B04 - Note: A electrical relay may be required to connect to the reverse light circuit for the “lift in reverse” feature. Download the installation instructions below for more details.
-
Heavy Truck, Lift Axle, Repair Parts, Shock Absorbers, Steering Stabilizer Shocks
R-009600 Hendrickson Lift Axle Stabilizer Shock
Sale!
*FREE UPS Ground
on orders of $99 or more!Heavy Truck, Lift Axle, Repair Parts, Shock Absorbers, Steering Stabilizer ShocksR-009600 Hendrickson Lift Axle Stabilizer Shock
This shock a OEM Hendrickson part. It fits some Composilite SC applications (SCT10/13) and others.
- Hendrickson right to substitute notice 3/29/2021 (alternative suppliers, same part number)
- Some shocks may have 009600-2 stamped on side.
Sold each with a minimum qty of 2.
SKU: HL-R-009600 -
Air Controls, Heavy Truck, Lift Axle, Non Steering, Self Steering
LC-SSI_R2 Hendrickson Air Control Kit for Steer & Non-Steer Lift Axles
Sale!
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Air Controls, Heavy Truck, Lift Axle, Non Steering, Self SteeringLC-SSI_R2 Hendrickson Air Control Kit for Steer & Non-Steer Lift Axles
AVAILABLE NOW!
Genuine LC-SSI Hendrickson Air Control Kit replaces existing HAC-SSI and HAC-NSI auxiliary lift axle control kits with a change in air line plumbing. The panel has exactly the same measurements as the HAC series, 2-3/4 x 7-1/4 with a bolt pattern of 2.25 x 6-5/8.
- Lift in reverse application (can be used in a non-steer application by not wiring the solenoid).
- Note: A electrical relay may be required to connect to the reverse light circuit for the “lift in reverse” feature. Download the installation instructions below for more details.
- 12vdc applied to the lift solenoid raises the axle. This would be typically connected to the reverse light circuit. Axle lowers when power is removed without manually pushing/pulling knob.
- Note that some vehicles use a negative switched reverse light circuit and would require the use of a relay to operate properly (not included).
- 12vdc applied to the lift solenoid raises the axle. This would be typically connected to the reverse light circuit. Axle lowers when power is removed without manually pushing/pulling knob.
- Note: A electrical relay may be required to connect to the reverse light circuit for the “lift in reverse” feature. Download the installation instructions below for more details.
- Hendrickson Part Number B-38914-2 (LC-SSI_R2 )
- LC-SSI_R2 Supecedes LC-SSI
- This kit is for lifting/lowering the suspension only and does not control brakes.
SKU: HL-LC-SSI_R2 - Lift in reverse application (can be used in a non-steer application by not wiring the solenoid).
-
Heavy Truck, Seals, Wheel End
RM-T03 RevMax Trailer TN Seal by RevHD
Sale!
Get 5% off in packs of 12!
*FREE UPS Ground
on orders of $99 or more!Heavy Truck, Seals, Wheel EndRM-T03 RevMax Trailer TN Seal by RevHD
RM-T03 RevMax Trailer TN Seal by RevHD
Severe duty wheel seals for trailer axles with TN spindles.
Equivalent to:
- National Gold 38000 series
- Stemco Discover
- SKF Extreme
Cross Reference;
- Stemco
- 373-0143
- 373-0243
- 372-7097
- 307-0743
- National
- 370025A
- 380025A
- SKF-CR
- 46305
- 46304
- 46300
- 46308
- ConMet
- 10045888
SKU: RV-RM-T03 -
Air Controls, Air Supply, Air Valves & Parts, Heavy Truck, Lift Axle, Push-Pull
320175 (320121) Velvac 5 Port 2 Position Valve
Sale!
*FREE UPS Ground
on orders of $99 or more!Air Controls, Air Supply, Air Valves & Parts, Heavy Truck, Lift Axle, Push-Pull320175 (320121) Velvac 5 Port 2 Position Valve
320175 (320121) Velvac 5 Port 2 Position Valve
Details:
- Part number 320121, and part number 320107 supersedes to 320175.
You will recieve part number 320175. - 1 inch mounting hole.
- 5) 1/4″–18 FPT ports
- (3) 9/32″ dia. body mounting holes
SKU: VV-320175 - Part number 320121, and part number 320107 supersedes to 320175.
-
Air Controls, Heavy Truck, Lift Axle, Non Steering
B2400-B03 AIRman Air Control Kit for Non-Steerable Lift Axle Applications (HAC-NSI)
Sale!
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Air Controls, Heavy Truck, Lift Axle, Non SteeringB2400-B03 AIRman Air Control Kit for Non-Steerable Lift Axle Applications (HAC-NSI)
Original AIRman, not imported!
Used in Non-Steerable lift axle applications.
This air control kit is made by AIRman which directly replaces HAC-NSI, formally from Hendrickson. The face of the panel does not bear the Hendrickson name but other than that, is identical to the original HAC-NSI. This panel also replaces flip switch model R-017512-00.
The Hendrickson version of the HAC-NSI is discontinued and is replaced by LC-NSI, which requires new plumbing and the panel size is different. Contact us for ordering the LC-NSI or use LC-SSI-2.
The B2400-B03 or HAC-NSI is the same as the B2400-B04 but does not have a solenoid for auto-lift feature, therefore no wires.
- This kit is for lifting/lowering the suspension only and does not control brakes.
Quantity discounts when ordering in bulk, mix-match with B2400-B04!
SKU: AP-B2400-B03 -
Wheel End, Hubs
10082207 ConMet PreSet Steer Hub Assembly – Hub Pilot-10 Stud-ABS
*FREE UPS Ground
on orders of $99 or more!Wheel End, Hubs10082207 ConMet PreSet Steer Hub Assembly – Hub Pilot-10 Stud-ABS
Aftermarket PreSet hubs, with pre-adjusted bearings, are shipped assembled and ready for installation. Look at specifications tab for details.
Aluminum Steer Hub for aluminum wheel application, 5.06 offset.
- ALUMINUM PRESET FF FRONT
- 13.2K GAWR
- 6600 lb Hub Load Rating
- Casting Number 10031185
Need help? Use the ConMet Hub Cross Reference and Part Identifier.
SKU: CO-10082207 -
Wheel End, Hubs
10082217 ConMet PreSet Drive Hub Assembly – Hub Pilot-10 Stud-ABS
*FREE UPS Ground
on orders of $99 or more!Wheel End, Hubs10082217 ConMet PreSet Drive Hub Assembly – Hub Pilot-10 Stud-ABS
Aftermarket PreSet hubs, with pre-adjusted bearings, are shipped assembled and ready for installation. Look at specifications tab for details.
Aluminum Drive Hub for aluminum wheel application, 1.31 offset.
- ALUMINUM PRESET R DRIVE
- 23K GAWR
- 11500 lb Hub Load Rating
- Casting Number 10001280
Need help? Use the ConMet Hub Cross Reference and Part Identifier.
SKU: CO-10082217
