Dsuban Spring Service, Truck Repair & Parts in Cincinnati, Ohio!
Family owned and operated since 1988, Dsuban Spring Service specializes in all types of Heavy Duty and Recreational Vehicle repair and parts including Suspension, Drivetrain, Alignment, Wheel Balance, Brake, Paint and Body, and more! As you can see on our About Us Page, we are a brick and mortar store with a physical location and contact references. You can find truck equipment, parts & repair in Cincinnati, but nothing like the service you will receive at Dsuban Spring Service.
Best Selling Products
-
Air Controls, Heavy Truck, Lift Axle, Non Steering, Self Steering
LC-SSI_R2 Hendrickson Air Control Kit for Steer & Non-Steer Lift Axles
On Sale!
*FREE UPS Ground
on orders of $99 or more!USA!
Air Controls, Heavy Truck, Lift Axle, Non Steering, Self SteeringLC-SSI_R2 Hendrickson Air Control Kit for Steer & Non-Steer Lift Axles
AVAILABLE NOW!
Genuine LC-SSI Hendrickson Air Control Kit replaces existing HAC-SSI and HAC-NSI auxiliary lift axle control kits with a change in air line plumbing. The panel has exactly the same measurements as the HAC series, 2-3/4 x 7-1/4 with a bolt pattern of 2.25 x 6-5/8.
- Lift in reverse application (can be used in a non-steer application by not wiring the solenoid).
- Note: A electrical relay may be required to connect to the reverse light circuit for the “lift in reverse” feature. Download the installation instructions below for more details.
- 12vdc applied to the lift solenoid raises the axle. This would be typically connected to the reverse light circuit. Axle lowers when power is removed.
- Note that some vehicles use a negative switched reverse light circuit and would require the use of a relay to operate properly (not included).
- 12vdc applied to the lift solenoid raises the axle. This would be typically connected to the reverse light circuit. Axle lowers when power is removed.
- Note: A electrical relay may be required to connect to the reverse light circuit for the “lift in reverse” feature. Download the installation instructions below for more details.
- Hendrickson Part Number B-38914-2 (LC-SSI_R2 )
- LC-SSI_R2 Supecedes LC-SSI
- This kit is for lifting/lowering the suspension only and does not control brakes.
SKU: HL-LC-SSI_R2 - Lift in reverse application (can be used in a non-steer application by not wiring the solenoid).
-
Air Controls, Air Valves & Parts, Heavy Truck, Lift Axle
19516-711 Watson-Chalin Hi-Flow Lift Axle Valve
On Sale!
*FREE UPS Ground
on orders of $99 or more!Air Controls, Air Valves & Parts, Heavy Truck, Lift Axle19516-711 Watson-Chalin Hi-Flow Lift Axle Valve
Used in Watson Chalin applications by Norgren/GT Development where the lift axle is raised in the power off condition. Norgren part number 5040-711-03.
Includes:
- Normally Closed Solenoid Control Valve Assy. as pictured but without Metri-Pack Plug which is non-polarity sensitive.
Ports:
- One system supply 1/2-14 NPTF
- Two delivery to load bag 1/2-14 NPTF
- Two delivery to lift bag 3/8-27 NPTF
- Regulated supply 1/8-27 NPTF
- Gage port (optional) 1/8-27 NPTF
Technical Details:
- Actuation: Solenoid
- Function: Normally closed
- Voltage: 12Vdc
- Operating temperature: -40 … 190 °F
- Operating temperature: -40 … 88 °C
- Electrical connection: 2 Leads (No Metri-Pack Connector)
If you want the Metri-Pack Plug version, use a 19516-311.
SKU: WC-19516-711 -
Heavy Truck, Lift Axle, Repair Parts, Shock Absorbers, Steering Stabilizer Shocks
632155 Lift Axle Coilover Return Stabilizer Shock (646177)
*FREE UPS Ground
on orders of $99 or more!Heavy Truck, Lift Axle, Repair Parts, Shock Absorbers, Steering Stabilizer Shocks632155 Lift Axle Coilover Return Stabilizer Shock (646177)
OE #632155 (Gabriel 646177) Pre-Banded Coilover return stabilizer shock for most lift axle steering applications.
Sold each with a minimum qty of 2.
SKU: 632155 -
Heavy Truck, Seals, Wheel End
RM-T03 RevMax Trailer TN Seal by RevHD
On Sale!
Get 5% off in packs of 12!
*FREE UPS Ground
on orders of $99 or more!Heavy Truck, Seals, Wheel EndRM-T03 RevMax Trailer TN Seal by RevHD
RM-T03 RevMax Trailer TN Seal by RevHD
Severe duty wheel seals for trailer axles with TN spindles.
Equivalent to:
- National Gold 38000 series
- Stemco Discover
- SKF Extreme
Cross Reference;
- Stemco
- 373-0143
- 373-0243
- 372-7097
- 307-0743
- National
- 370025A
- 380025A
- SKF-CR
- 46305
- 46304
- 46300
- 46308
- ConMet
- 10045888
SKU: RV-RM-T03 -
Air Cylinders, Air Supply, Heavy Truck
B3000-259-H-6.5 AIRman Tail-a-Gater Tailgate Cylinder
On Sale!
*FREE UPS Ground
on orders of $99 or more!USA!
Air Cylinders, Air Supply, Heavy TruckB3000-259-H-6.5 AIRman Tail-a-Gater Tailgate Cylinder
B3000-259-H-6.5 (w/6.5 inch rod) AIRman Tail-a-Gater Tailgate Cylinder is made from heavy duty aluminum thick wall tubing with pivoting trunnion flange for harsh conditions.
Does NOT include clevis and is exactly as pictured (rod extended). Drawing below & in Specs.
OE Numbers:
- East Mfg. 510-25950-03 (cylinder only)
- Velvac 100603
- MAC Trailer 27080091
Specs:
- Model Number: B3000-259-H6.5
- Bore Size: 6.00in
- Cylinder Length: 7-7/8in
- Stroke: 3.00in
- Extended Rod Length: 6.50in (Measuring from flat studded plate to end of rod)
- Rod Size: 5/8in
- Air inlet is on the back plate. Vent is on the pushrod side.
SKU: AP-B3000-259-H-6.5 -
Hubs, Wheel End
10082219 ConMet PreSet Drive Hub Assembly – Hub Pilot-10 Stud-ABS
*FREE UPS Ground
on orders of $99 or more!Hubs, Wheel End10082219 ConMet PreSet Drive Hub Assembly – Hub Pilot-10 Stud-ABS
Aftermarket PreSet hubs, with pre-adjusted bearings, are shipped assembled and ready for installation. Look at specifications tab for details.
Iron Drive Hub for aluminum wheel application, 1.31 offset.
- IRON PRESET R DRIVE
- 26K GAWR
- 13000 lb Hub Load Rating
- Casting Number 10036625
Need help? Use the ConMet Hub Cross Reference and Part Identifier.
SKU: CO-10082219 -
Air Cylinders, Air Supply, Heavy Truck
B3000-424 AIRman 2in Air Cylinder 3in Stroke
On Sale!
*FREE UPS Ground
on orders of $99 or more!USA!
Air Cylinders, Air Supply, Heavy TruckB3000-424 AIRman 2in Air Cylinder 3in Stroke
B3000-424 AIRman 2in Air Cylinder 3in Stroke
AIR CYLINDER, 2.0 X 3.0 STROKE, SPRING EXT., DOUBLE ACTING
Drawing below & in Specs.
OE Numbers:
- AKW381140A0
- ACKW381140A0
Specs:
- Model Number: B3000-424
- Bore Size: 2.00in
- Stroke: 3.00in
- Extended Rod Length: 15.0 in from center of clevis eye to eye
- Collapsed Rod Length: 12.0 in from center of clevis eye to eye
- Clevis Eye Hole Diameter: .625 in
- Rod Diameter: 1 in
SKU: AP-B3000-424 -
Air Controls, Heavy Truck, Lift Axle, Self Steering
B2400-B04 AIRman Air Control Kit for Steerable Lift Axle Applications (HAC-SSI)
On Sale!
*FREE UPS Ground
on orders of $99 or more!USA!
Air Controls, Heavy Truck, Lift Axle, Self SteeringB2400-B04 AIRman Air Control Kit for Steerable Lift Axle Applications (HAC-SSI)
Used in Steerable lift axle applications.
This air control kit is made by AIRman which directly replaces HAC-SSI formally from Hendrickson. The face of the panel does not bear the Hendrickson name but other than that, is identical to the original HAC-SSI. This panel also replaces flip switch model R-017513-00.
The Hendrickson version of the HAC-SSI is discontinued and is replaced by LC-SSI, which requires new plumbing and the panel size is different. We stock it also, and you can find it HERE.
- Note: A electrical relay may be required to connect to the reverse light circuit for the “lift in reverse” feature. Download the installation instructions below for more details.
- 12vdc applied to the lift solenoid raises the axle. This would be typically connected to the reverse light circuit.
- Note that some vehicles use a negative switched reverse light circuit and would require the use of a relay to operate properly (not included).
- 12vdc applied to the lift solenoid raises the axle. This would be typically connected to the reverse light circuit.
- This kit is for lifting/lowering the suspension only and does not control brakes.
Quantity discounts when ordering in bulk, mix-match with B2400-B03!
SKU: AP-B2400-B04 - Note: A electrical relay may be required to connect to the reverse light circuit for the “lift in reverse” feature. Download the installation instructions below for more details.
-
Air Controls, Air Supply, Air Valves & Parts, Heavy Truck, Lift Axle, Push-Pull
320175 (320121) Velvac 5 Port 2 Position Valve
On Sale!
*FREE UPS Ground
on orders of $99 or more!Air Controls, Air Supply, Air Valves & Parts, Heavy Truck, Lift Axle, Push-Pull320175 (320121) Velvac 5 Port 2 Position Valve
320175 (320121) Velvac 5 Port 2 Position Valve
Details:
- Part number 320121, and part number 320107 supersedes to 320175.
You will recieve part number 320175. - 1 inch mounting hole.
- 5) 1/4″–18 FPT ports
- (3) 9/32″ dia. body mounting holes
SKU: VV-320175 - Part number 320121, and part number 320107 supersedes to 320175.
-
Heavy Truck, Solenoid Valves, Tire Chains, Winter Products
9301 OnSpot Electric / Air Solenoid
*FREE UPS Ground
on orders of $99 or more!Heavy Truck, Solenoid Valves, Tire Chains, Winter Products9301 OnSpot Electric / Air Solenoid
Replace your stuck / frozen solenoid with a new one from OnSpot Chains.
This is an OE product supplied by OnSpot Tire Chains.
Specifications;
- 12 vdc
- 1/4 npt ports
- (Replacement for 5047-B Solenoid)
SKU: OS-9301 -
Heavy Truck, Seals, Wheel End
RM-D02 RevMax Drive Seal by RevHD
On Sale!
Get 5% off in packs of 12!
*FREE UPS Ground
on orders of $99 or more!Heavy Truck, Seals, Wheel EndRM-D02 RevMax Drive Seal by RevHD
RM-D02 RevMax Drive Seal by RevHD
Severe duty wheel seals for Eaton / Meritor drive axles.
Equivalent to:
- National Gold 38000 series
- Stemco Discover
- SKF Extreme
Cross Reference;
- Stemco
- 393-0173
- 393-0273
- 392-9131
- 309-0973
- National
- 370003A
- 380003A
- SKF-CR
- 47697
- 47696
- 47691
- 47694
- 47692
- 47695
- 47693
- ConMet
- 10045887
SKU: RV-RM-D02
Our Brands
b
v
z