AIRman Products
Showing 1–24 of 57 results
-
Air Controls, Heavy Truck, Lift Axle, Non Steering
B2400-B03 AIRman Air Control Kit for Non-Steerable Lift Axle Applications (HAC-NSI)
Sale!
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Air Controls, Heavy Truck, Lift Axle, Non SteeringB2400-B03 AIRman Air Control Kit for Non-Steerable Lift Axle Applications (HAC-NSI)
Original AIRman, not imported!
Used in Non-Steerable lift axle applications.
This air control kit is made by AIRman which directly replaces HAC-NSI, formally from Hendrickson. The face of the panel does not bear the Hendrickson name but other than that, is identical to the original HAC-NSI. This panel also replaces flip switch model R-017512-00.
The Hendrickson version of the HAC-NSI is discontinued and is replaced by LC-NSI, which requires new plumbing and the panel size is different. Contact us for ordering the LC-NSI or use LC-SSI-2.
The B2400-B03 or HAC-NSI is the same as the B2400-B04 but does not have a solenoid for auto-lift feature, therefore no wires.
- This kit is for lifting/lowering the suspension only and does not control brakes.
Quantity discounts when ordering in bulk, mix-match with B2400-B04!
SKU: AP-B2400-B03 -
Air Controls, Heavy Truck, Lift Axle, Self Steering
B2400-B04 AIRman Air Control Kit for Steerable Lift Axle Applications (HAC-SSI)
Sale!
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Air Controls, Heavy Truck, Lift Axle, Self SteeringB2400-B04 AIRman Air Control Kit for Steerable Lift Axle Applications (HAC-SSI)
Original AIRman, not imported!
Used in Steerable lift axle applications.
This air control kit is made by AIRman which directly replaces HAC-SSI formally from Hendrickson. The face of the panel does not bear the Hendrickson name but other than that, is identical to the original HAC-SSI. This panel also replaces flip switch model R-017513-00.
The Hendrickson version of the HAC-SSI is discontinued and is replaced by LC-SSI, which requires new plumbing and the panel size is different. We stock it also, and you can find it HERE.
- Note: A electrical relay may be required to connect to the reverse light circuit for the “lift in reverse” feature. Download the installation instructions below for more details.
- 12vdc applied to the lift solenoid raises the axle. This would be typically connected to the reverse light circuit.
- Note that some vehicles use a negative switched reverse light circuit and would require the use of a relay to operate properly (not included).
- 12vdc applied to the lift solenoid raises the axle. This would be typically connected to the reverse light circuit.
- This kit is for lifting/lowering the suspension only and does not control brakes.
Quantity discounts when ordering in bulk, mix-match with B2400-B03!
SKU: AP-B2400-B04 - Note: A electrical relay may be required to connect to the reverse light circuit for the “lift in reverse” feature. Download the installation instructions below for more details.
-
Air Cylinders, Air Supply, Heavy Truck
B3000-259-H-5 AIRman Tail-a-Gater Tailgate Cylinder
Sale!
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Air Cylinders, Air Supply, Heavy TruckB3000-259-H-5 AIRman Tail-a-Gater Tailgate Cylinder
B3000-259-H-5 (w/5 inch rod) AIRman Tail-a-Gater Tailgate Cylinder is made from heavy duty aluminum thick wall tubing with pivoting trunnion flange for harsh conditions.
Does NOT include clevis and is exactly as pictured (rod extended). Drawing below & in Specs.
OE Numbers:
- MAC Trailer 27080090
- 2190022
- PB3000
- T212703259
Specs:
- Model Number: B3000-259-H5
- Bore Size: 6.00in
- Cylinder Length: 7-7/8in
- Stroke: 3.00in
- Extended Rod Length: 5in (Measuring from flat studded plate to end of rod)
- Rod Size: 5/8in
- Air inlet is on the back plate. Vent is on the pushrod side.
SKU: AP-B3000-259-H-5 -
Air Cylinders, Air Supply, Heavy Truck
B3000-259-H-6.5 AIRman Tail-a-Gater Tailgate Cylinder
Sale!
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Air Cylinders, Air Supply, Heavy TruckB3000-259-H-6.5 AIRman Tail-a-Gater Tailgate Cylinder
B3000-259-H-6.5 (w/6.5 inch rod) AIRman Tail-a-Gater Tailgate Cylinder is made from heavy duty aluminum thick wall tubing with pivoting trunnion flange for harsh conditions.
Does NOT include clevis and is exactly as pictured (rod extended). Drawing below & in Specs.
OE Numbers:
- East Mfg. 510-25950-03 (cylinder only)
- Velvac 100603
- MAC Trailer 27080091
Specs:
- Model Number: B3000-259-H6.5
- Bore Size: 6.00in
- Cylinder Length: 7-7/8in
- Stroke: 3.00in
- Extended Rod Length: 6.50in (Measuring from flat studded plate to end of rod)
- Rod Size: 5/8in
- Air inlet is on the back plate. Vent is on the pushrod side.
SKU: AP-B3000-259-H-6.5 -
Air Cylinders, Air Supply, Heavy Truck
B3000-424 AIRman 2in Air Cylinder 3in Stroke
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Air Cylinders, Air Supply, Heavy TruckB3000-424 AIRman 2in Air Cylinder 3in Stroke
B3000-424 AIRman 2in Air Cylinder 3in Stroke
AIR CYLINDER, 2.0 X 3.0 STROKE, SPRING EXT., DOUBLE ACTING
Drawing below & in Specs.
OE Numbers:
- AKW381140A0
- ACKW381140A0
Specs:
- Model Number: B3000-424
- Bore Size: 2.00in
- Stroke: 3.00in
- Extended Rod Length: 15.0 in from center of clevis eye to eye
- Collapsed Rod Length: 12.0 in from center of clevis eye to eye
- Clevis Eye Hole Diameter: .625 in
- Rod Diameter: 1 in
SKU: AP-B3000-424 -
Heavy Truck, Air Supply, Air Cylinders
B3000-425 AIRman 2.5in Air Cylinder 4.13in Stroke
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Heavy Truck, Air Supply, Air CylindersB3000-425 AIRman 2.5in Air Cylinder 4.13in Stroke
B3000-425 AIRman 2.5in Air Cylinder 4.13in Stroke
AIR CYLINDER, 2.50 BORE x 4.125 STROKE, DOUBLE-ACTING
Drawing below & in Specs.
Specs:
- Model Number: B3000-425
- Bore Size: 2.5in
- Stroke: 4.125in
- Extended Rod Length: 15.63 in from center of clevis eye to end of push rod
- Collapsed Rod Length: 11.5 in from center of clevis eye to end of push rod
- Clevis Eye Hole Diameter: .5 in
- Rod Diameter: 1 in
OE Numbers:
- ACKW381140B0
Drawing / Dimensions:
SKU: AP-B3000-425 -
Heavy Truck, Air Supply, Air Cylinders
B3000-517 AIRman 3.5in Air Cylinder 8in Stroke
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Heavy Truck, Air Supply, Air CylindersB3000-517 AIRman 3.5in Air Cylinder 8in Stroke
B3000-517 AIRman 3.5in Air Cylinder 8in Stroke
AIR CYLINDER, 3.50 BORE x 8 STROKE, DOUBLE-ACTING
Drawing below & in Specs.
Specs:
- Model Number: B3000-517
- Bore Size: 3.5in
- Stroke: 8in
- Extended Rod Length: 20.50 in from center of clevis eye to center of clevis eye
- Collapsed Rod Length: 12.5 in from center of clevis eye to center of clevis eye
- Clevis Eye Hole Diameter: 1 in both ends with brass bushings
- Rod Diameter: 1-1/8 in
- Includes two 1in clevis pins
OE Numbers:
- None
SKU: AP-B3000-517 -
Air Supply, Air Switch, Dump Valves, Dump Valves, Heavy Truck, Suspension
K1100-330 AIRman 3-Way Ball Valve 1/4 NPTF
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Air Supply, Air Switch, Dump Valves, Dump Valves, Heavy Truck, SuspensionK1100-330 AIRman 3-Way Ball Valve 1/4 NPTF
This 3-way valve is used to on trucks, trailers, and other applications. This is a very high quality valve and should last for many years.
Specs:
- Ports:
- 1/4″ NPTF Inlet (x2)
- 1/4” NPTF Delivery
- Fits a 1 inch Mounting Hole
- Made in the USA!
Cross-Reference:
- Reitnouer P6760-0009
- Mac 24700203
- East Mfg 510-05020-00
SKU: AP-K1100-330 - Ports:
-
Air Supply, Air Switch, Dump Valves, Dump Valves, Heavy Truck, Suspension
K1100-331 AIRman 3-Way Ball Valve 1/4 NPTF
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Air Supply, Air Switch, Dump Valves, Dump Valves, Heavy Truck, SuspensionK1100-331 AIRman 3-Way Ball Valve 1/4 NPTF
This 3-way valve is used to on trucks, trailers, and other applications. This is a very high quality valve and should last for many years.
Specs:
- Ports:
- 1/4″ NPTF Inlet (x2)
- 1/4” NPTF Delivery
- Fits a 1/2 inch Mounting Hole
- Made in the USA!
Cross-Reference:
- Hendrickson VS-22535
- Hendrickson AK-147-1
- Mac Trailer 26301155
- Meritor R986018
- SMC Pneumatics R014C
SKU: AP-K1100-331 - Ports:
-
Air Controls, Heavy Truck, Lift Axle, Trailer Controls
B2400-575-ANDG AIRman Lift (nDn) Axle Control Valve Reg Ride
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Air Controls, Heavy Truck, Lift Axle, Trailer ControlsB2400-575-ANDG AIRman Lift (nDn) Axle Control Valve Reg Ride
B2400-575-ANDG – This compact design incorporates an electric solenoid, air guage, lift bag valve and a regulated ride bag valve into one integrated body.
- Axle is in the Normally-Down position until 12v is delivered to the solenoid.
- Includes an air guage for easy ride bag control.
- Does NOT have a manual override/push-pull. (Does have a small screwdriver slot for emergency lift/lower)
SKU: AP-B2400-575-ANDG -
Air Controls, Heavy Truck, Lift Axle, Trailer Controls
B2400-575-ANUG AIRman Lift (nUp) Axle Control Valve Reg Ride
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Air Controls, Heavy Truck, Lift Axle, Trailer ControlsB2400-575-ANUG AIRman Lift (nUp) Axle Control Valve Reg Ride
B2400-575-ANUG – This compact design incorporates an electric solenoid, air guage, lift bag valve and a regulated ride bag valve into one integrated body.
- Axle is in the Normally-Up position until 12v is delivered to the solenoid.
- Includes an air guage for easy ride bag control.
- Does NOT have a manual override/push-pull. (Does have a small screwdriver slot for emergency lift/lower)
SKU: AP-B2400-575-ANUG -
Air Controls, Heavy Truck, Lift Axle, Trailer Controls
B2400-B53 AIRman Lift Axle Control Valve
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Air Controls, Heavy Truck, Lift Axle, Trailer ControlsB2400-B53 AIRman Lift Axle Control Valve
This compact design incorporates an electric solenoid, manual operator, lift bag valve and ride bag valve into one integrated body, using the vehicle height control valve to equalize the ride bags.
OE Numbers:
- Hendrickson C-31543
- Hendrickson VS-31844-1
- Automann 171.HVS3841
- Dayton Parts 334-2007
- Hendrickson AKAD0008-1 OR AKAD2010-1 (Valve Only)
SKU: AP-B2400-B53 -
Air Controls, Heavy Truck, Lift Axle, Trailer Controls
B2400-B54 AIRman Lift Axle Control Valve Regulated Ride
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Air Controls, Heavy Truck, Lift Axle, Trailer ControlsB2400-B54 AIRman Lift Axle Control Valve Regulated Ride
This compact design incorporates an electric solenoid, manual operator, lift bag valve and a regulated ride bag valve into one integrated body.
OE Numbers:
- Hendrickson C-31546
- Hendrickson VS-31844-2
- Automann 171.HVS3842
- Hendrickson AKAD0009-1 or AKAD2011-1 (Valve Only)
SKU: AP-B2400-B54 -
Air Supply, Air Switch, Heavy Truck, Push-Pull
B2400-B63 AIRman 3-way Auto Reset Valve
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Air Supply, Air Switch, Heavy Truck, Push-PullB2400-B63 AIRman 3-way Auto Reset Valve
Quik-Draw pneumatic 3-way auto reset valve featuring integral knob efficiently controls the release of the slider pins once parking brakes are fully engaged.
OE Numbers:
- Dayton 334-1846
- Hendrickson VS-25224
- Hendrickson VS-25223 (no fittings)
- Automann 171.H754, 171.H754WF
- SAF Holland 90560012
SKU: AP-B2400-B63 -
Heavy Truck, Air Supply, Check Valves
B2400-B85 AIRman Check Valve 1/2-3/4 NPT
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Heavy Truck, Air Supply, Check ValvesB2400-B85 AIRman Check Valve 1/2-3/4 NPT
This valve is used to only let the air travel in one direction only and is used on trucks, trailers, and other applications.
Specs:
- Ports:
- 3/4″ NPT Male Inlet
- 1/2” NPT Male Delivery
- Made in the USA!
Cross-Reference:
- 12900686
- Velvac 320001
- Bendix 800375 and SC-3
- AIRman B2400-767 (Packaged for retail)
SKU: AP-B2400-B85 - Ports:
-
Heavy Truck, Air Supply, Air Cylinders
B3000-301 AIRman Tail-a-Gater Tailgate Cylinder w/Bkt
Sale!
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Heavy Truck, Air Supply, Air CylindersB3000-301 AIRman Tail-a-Gater Tailgate Cylinder w/Bkt
B3000-301 AIRman Tail-a-Gater Tailgate Cylinder with Mounting Bracket
- SINGLE ACTING CYLINDER
Special Order.
Specs:
- Model Number: B3000-301
- Mounting bolt spacing 3.50in
- Stamped with letter “K” on end
- SINGLE ACTING
- MOUNTING BRACKET AND SPRING LOAD TO MATCH MGM P/N 5005012
- Bore Size: 6.00in
- Cylinder Length: 11.12in measuring from center of mounting plate swivel bolts to end of cylinder
- Stroke: 4.38in
- Extended Rod Length: 16.48in measuring from center of mounting plate swivel bolts to end of rod
- Collapsed Rod Length: 12.10in measuring from center of mounting plate swivel bolts to end of rod
- Rod Size: 5/8-18 in
- Rod Thread Length: 6.00in
- Supply port 1/4NPT
- Air inlet is on the back plate. Vent is on the pushrod side.
SKU: AP-B3000-301 -
Heavy Truck, Air Supply, Air Cylinders
B3000-379 AIRman Tail-a-Gater Tailgate Cylinder w/Bkt
Sale!
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Heavy Truck, Air Supply, Air CylindersB3000-379 AIRman Tail-a-Gater Tailgate Cylinder w/Bkt
B3000-379 AIRman Tail-a-Gater Tailgate Cylinder with Mounting Bracket
- DOUBLE ACTING CYLINDER
Specs:
- Model Number: B3000-379
- Mounting bolt spacing 2.16in
- Stamped with letter “W” on end
- DOUBLE ACTING
- MOUNTING BRACKET AND SPRING LOAD TO MATCH MGM P/N R5AHD.
- Bore Size: 6.00in
- Cylinder Length: 11.12in measuring from center of mounting plate swivel bolts to end of cylinder
- Stroke: 4.38in
- Extended Rod Length: 16.48in measuring from center of mounting plate swivel bolts to end of rod
- Collapsed Rod Length: 12.10in measuring from center of mounting plate swivel bolts to end of rod
- Rod Size: 3/4-16 in
- Rod Thread Length: 6.00in
- Supply port 1/4NPT
- Air inlet is on the back plate. Vent is on the pushrod side.
SKU: AP-B3000-379 -
Air Controls, Heavy Truck, Lift Axle, Trailer Controls
B5000-026-ANUG AIRman Lift Axle Control Valve Regulated Ride 12v
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Air Controls, Heavy Truck, Lift Axle, Trailer ControlsB5000-026-ANUG AIRman Lift Axle Control Valve Regulated Ride 12v
B5000-026-ANUG – This compact design incorporates an electric solenoid, manual operator, lift bag valve and a regulated ride bag valve into one integrated body in a PVC enclosure.
OE Numbers:
- Axle is in the Normally-Up position until 12v is delivered to the solenoid. Can be operated manually with push-pull inside box.
- Outside mounted box enclosure.
- Usually 1 week lead time. Please call if you need sooner.
SKU: AP-B5000-026-ANUG -
Air Controls, Heavy Truck, Lift Axle, Non Steering, Self Steering, Trailer Controls
B5000-205 AIRman Lift Axle Control Valve Regulated Ride
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Air Controls, Heavy Truck, Lift Axle, Non Steering, Self Steering, Trailer ControlsB5000-205 AIRman Lift Axle Control Valve Regulated Ride
This compact design incorporates an electric solenoid, manual operator, lift bag valve and a regulated ride bag valve into one integrated body.
OE Numbers:
- Previously Hendrickson HAC-UCO.
- Outside mounted box enclosure.
- Usually 2-3 week lead time. Please call if you need sooner.
SKU: AP-B5000-205 -
Heavy Truck, Air Supply, Air Cylinders
TRB3.50X8.58 AIRman 3.5in Air Cylinder 8.58in Stroke
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Heavy Truck, Air Supply, Air CylindersTRB3.50X8.58 AIRman 3.5in Air Cylinder 8.58in Stroke
TRB3.50X8.58 AIRman 3.5in Air Cylinder 8.58in Stroke
See Drawing Below.
Specs:
- 3.50″ Bore X 8.58” Stroke Cylinder
- 1/2 inch Clevis Pin and Cotter Pin for Cylinder End Included
- Clevis for the rod is NOT included.
- 5/8” – 18 UNF threads on rod.
Short lead time. If this is a rush order, please call us.
SKU: AP-TRB3.5X8.58 -
Air Supply, Heavy Truck, Solenoid Valves
B2400-604-8-DB AIRman Manifold-8 Port w/Solenoids
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Air Supply, Heavy Truck, Solenoid ValvesB2400-604-8-DB AIRman Manifold-8 Port w/Solenoids
B2400-604-8-DB AIRman Manifold-8 Port w/Solenoids
Specs:
- Eight each 24v DC, 6w solenoids with 19.6in leads.
- 8 Station Manifold, 2-way Normally Closed.
- Clear Anodized Aluminum.
- All ports are 1/8 in NPTF.
This is a special order item, so there may be a short lead time. If this is a rush order, please call us.
SKU: AP-B2400-604-8-DB -
Air Controls, Air Supply, Air Valves & Parts, Dump Valves, Dump Valves, Heavy Truck, Lift Axle, Push-Pull, Suspension
B2400-628 AIRman 5-Port 2-Position Push-Pull Valve
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Air Controls, Air Supply, Air Valves & Parts, Dump Valves, Dump Valves, Heavy Truck, Lift Axle, Push-Pull, SuspensionB2400-628 AIRman 5-Port 2-Position Push-Pull Valve
B2400-628 AIRman 5-Port 2-Position Push-Pull Valve
Details:
- 5-way, 2 position valve
- (3) 1/8″ FPT ports
- (2) Vented Caps to protect exhaust ports
- Replaces Talbert AVB2400-628
SKU: AP-B2400-628 -
Air Controls, Air Supply, Air Valves & Parts, Heavy Truck, Lift Axle, Push-Pull
B2400-891 AIRman 5-Port 2-Position Valve w/Pilot Return
*FREE UPS Ground
on orders of $99 or more!MADE IN USA!
Air Controls, Air Supply, Air Valves & Parts, Heavy Truck, Lift Axle, Push-PullB2400-891 AIRman 5-Port 2-Position Valve w/Pilot Return
Threaded aluminum mounting boss for 3/4″ to 1″ diameter through hole mounting — nut included.
Details:
- (5) 1/4″–18 FPT ports
- (1) 1/4” – 18 FPT Pilot Port
- 3/4″-16 Panel Nut
- (2) 9/32″ dia. body mounting holes
Application:
- Two position valve operates any double acting air cylinder.
- Two position valve operates systems where full air or vacuum pressure must be isolated.
- Air applied to the pilot port will return the push buttion to the “in” position.
SKU: AP-B2400-891
